Elenberg LVD-1502 Manuel d'utilisateur télécharger pdf (Page 58)

SYSTEM CONNECTIONS

connecting a PC:

• This unit can be used to display the output from a PC (personal computer) using a VGA

cable. Follow the steps using the ﬁ gure below as a guide to connect:

1. Connect one end of the VGA cable to the VGA input jack on the rear panel of this

unit.

2. Connect the other end to your PC’s VGA output connector.

3. Connect one end of the (mm) audio cable (not-supplied) to the PC audio input jack

on the rear panel of the unit.

4. Connect the other end to the PC audio output jack of your PC.

5. You are suggested to set the PC’s resolution at 1024x768@60Hz.

PLEASE NOTE:

All PCs and other devices can have different features and support varying types of

audio and connections. Please refer to the operating instructions of your PC device for

information on what is or is not supported. The manufacturer does not certify complete

compatibility with all PC systems.

• Following connection, turn the main power of this unit and your PC; press the “SOURCE”

button to shift to VGA mode. Your PC image should now be displayed.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Pas de commentaire

Elenberg LVD-1502 Manuel d'utilisateur Page 58